Back to Writing

October 27, 2026

I built a desk buddy that watches my calendar, my Mac, and my meetings (Part 1)

I wanted a desk companion that is more than a clock. The result is a small round robot with expressive eyes. It gets surprised when a meeting is about to start, grumpy when my Mac's CPU is pinned, and falls asleep at night. It is also a rotary knob and touchscreen that fires shortcuts on my Mac.

This is Part 1: what I built over a weekend and the decisions I am happy with. Part 2 will cover what I finally achieved once everything was finished.

Code: github.com/sachin-sn/desk-buddy

What it is

The face is an Elecrow CrowPanel 1.28" rotary display (ESP32-S3). I 3D-printed the head and body around it with a CadQuery script, so every dimension is a parameter I can re-run.

What it does

  • Mood engine. The eyes blink, wander and change mood by priority:
    1. A meeting within 10 minutes: surprised
    2. Sleep hours: asleep
    3. Mac CPU at 85% or more: grumpy
    4. Just touched: happy
    5. Late-evening idle: tired
  • Calendar alerts. A Google Apps Script runs as me and serves the next 36 hours of events as JSON. The device polls it every 5 minutes. This avoids Google's OAuth limits for embedded devices and keeps credentials off the device entirely.
  • Shortcuts. Bluetooth keyboard buttons for media keys, typing and Spotlight macros. A small Node helper on the Mac handles what a keyboard can't, like opening a specific app or running a Shortcuts automation.
  • Web editor. I edit layouts, timers and settings from a browser, served from the device itself.

Design decisions I'm happy with

1. Two cores, strict roles. Core 1 only draws. Core 0 handles everything that can block: WiFi, flash and Bluetooth. They talk through queues, so the eyes never stutter.

2. Pure logic in dependency-free headers. The eye engine, key-combo parser and agenda logic compile with plain g++, so I could test them on my laptop with no hardware. I even render a contact sheet of every mood on the host.

3. Action IDs, not commands. The buddy only sends IDs like open-notes. The Mac helper maps them to real commands from its own config. A bug or a stolen token can't become remote code execution on my laptop.

4. Layouts in NVS, not the filesystem. Re-flashing the web UI can never wipe my shortcuts.

Making the body

The head holds the module from the front with three crush ribs, tilts back 20°, and sits on a diamond-shaped neck peg so it can't swivel. The torso is shifted behind the neck so the bot doesn't tip backwards, and the body prints flat with no supports.

The LED ring was the fun puzzle. The module's LEDs sit at 12, 2, 4, 6, 8 and 10 o'clock, so in the first print I cut windows through the wall for five of them. The 6 o'clock LED sits right where the chin and neck socket are, so it got a shallow groove instead of a hole.

For the second iteration I printed with two different colours of PLA and used clear filament to diffuse the LED light.

What I'd do next

  • Security. Plain HTTP on the LAN is my main known weak spot. Both this and the next item are on my backlog.
  • Network blocking. Calendar fetches can briefly block the network core.
  • Rubber feet, so it stops sliding when I tap it.
  • Cut the cable. Right now it works while connected to my Mac over USB. I want it to run without cables, over Bluetooth and WiFi only. For that I am adding a charging module with a USB-C connector and a Li-ion battery.

What it cost

Item Cost Status
ESP32 display Rs. 4,000 Bought
3D test prints Rs. 500 Done
18650 Li-ion battery Rs. 250 Bought, not yet fitted
Charging module Rs. 200 Bought, not yet fitted

Overall: about Rs. 5,000 and a weekend of effort.

Wait for Part 2

Once the battery and charging module are in and the cables are gone, I will post the follow-up with what I finally achieved.